[SOLD] Parting out 73 Dart Sport 340 4-speed car

-
Status
Not open for further replies.

Moparparts

Well-Known Member
Joined
Nov 15, 2010
Messages
3,919
Reaction score
213
Location
PA
Rating - 100%
274   0   0
Contact seller
For parts is this rolling chassis 73 Dart Sport H code 4-speed car with disc brakes and some A/C components. There is also a pic of parts, which are available, as well as an extra pass. fender, 73 doors, and deck lid. The rear is an open 8 1/4 and has a 3.21 tag, and is complete with snubber, good drums and hardware. Price for the rear would be $275 plus shipping. The structural and sheet metal welded parts are not being cut or offered at this time, but may be in the future, so the thread will be updated accordingly. PM or post for availability, prices, and additional pics if needed.

The steering column is for floor shift and is for manual steering. It is in good used complete condition. It has the key and the wiring and interlock spring is intact and good. Price for the column with the dash bracket, firewall floor bracket, manual coupler and nice original used black steering wheel would be $350. Price for the col with brackets and the coupler with-out the wheel would be $300 and price for the column with-out the coupler or steering wheel but with the brackets would be $265. If you want it with-out the brackets it would be $235 plus shipping.

4-speed drive shaft for the 8 1/4 is approx. 48 7/8 or 5/16 from center of U joint to center of U joint. 3.25 tube diameter and 7260 ends. Price with slip yoke would be $125 plus shipping.
 

Attachments

  • 6-5dartemail (17).jpg
    28.5 KB · Views: 1,130
  • 5-6dart2email (6).jpg
    38.7 KB · Views: 1,122
  • 5-6dart2email (5).jpg
    38.8 KB · Views: 1,136
  • 5-6dart2email (15).jpg
    42 KB · Views: 1,124
  • 5-6dart2email (7).jpg
    42.1 KB · Views: 1,118
  • 5-29dartemail (2).jpg
    47.9 KB · Views: 1,131
  • 5-29dartemail (1).jpg
    45.9 KB · Views: 1,157
  • 5-29dartemail (5).jpg
    41 KB · Views: 1,125
  • 5-29dartemail (8).jpg
    41.5 KB · Views: 1,145
  • 6-5dartemail (18).jpg
    30.6 KB · Views: 1,128
How are the interior rear side panels? Do they have the cutout for the shoulder belt down at the bottom?
 
Most of the interior was parchment originally, but some has been sprayed black and others were changed to black. I will check on them and let you know.
Thanks,
Don

How are the interior rear side panels? Do they have the cutout for the shoulder belt down at the bottom?
 
The fan shroud is part number 3673820 it is not cracked but has 2 small notches cut on the engine side edge price would be $65 The splash shields have some broken out areas around the bolt holes price is $15 each Radio bezel is cut price is $15 and the hood latch cable does function but has a break in the cable housing where it attaches to the latch. Price for the cable with inside handle and bracket is $25 all prices +shipping
 
All PMs returned. This car does have all factory tinted glass in decent used condition as well as all the chrome moldings.

Rear interior panels are SOLD
 
The fan shroud is part number 3673820. It is not cracked, but has 2 notches cut and a scrape on the engine side edge. Price is $65 + shipping from Pa 17086. Post or Pm.
 

Attachments

  • 7-16shroud.jpg
    19.1 KB · Views: 1,034
  • 7-16shroud (1).jpg
    18.8 KB · Views: 1,011
  • 7-16shroud (2).jpg
    25.1 KB · Views: 1,028
  • 7-16shroud (3).jpg
    22.4 KB · Views: 1,003
  • 7-16shroud (4).jpg
    18.3 KB · Views: 1,023
They are nice used original black panels with good color. They are not warped, brittle, or deteriorated. There is a small stress crack on the passenger's side at the upper screw hole, and a crack on the pinch weld edge cap of the driver's side. Price is $175 plus shipping. PM with shipping address for quote if interested.
How much for the rear sail panels?
 
The buckets can be shipped. If they don't sell locally soon i will be taking them apart for shippping and will gladly send you a quote just let me know the ship to zip

I wish you were close. Really need bucket seats.
 
PM sent on the passenger bucket seat rail..
 
PM Sent
Man that looks like a completely good car:cry: Have a title for it? Just curious on that.
How much for the fold down back seat with brackets for wheel wells and panel that goes into trunk. Ok whole fold down setup minus package tray metal?

Thanks!!
 
Shipping quote later today

What would you want for front LCA's?
I am selling the arms with the sway bar currently if interested in both PM me

PM sent on the passenger bucket seat rail..
PM sent

PM Sent
Man that looks like a completely good car:cry: Have a title for it? Just curious on that.
How much for the fold down back seat with brackets for wheel wells and panel that goes into trunk. Ok whole fold down setup minus package tray metal?

Thanks!!
Yes i have a clear title in my name, the car is very rough. A link is in the thread with price for the extra fold down seat pieces -$50 if you don't want the rear package shgelf

PM sent on armrests and door handle cups.
PM returned

still got those buckets seats?
Yes i do PM coming your way
 
8 1/4 rear price is $250 and a separate thread has been started for it and the Lower control arms with the sway bar . All the PM's have been returned i believe, if i missed you please let me know
Thanks Don
 
Status
Not open for further replies.
-
Back
Top