Carb to Holley Terminator EFI Conversion How To w/lots of pics

Here are the final pics for now. I got the ECU mounted up inside the car. It is located on the passenger side kick panel. I mounted it so that the kick panel will still be able to go on. It fits perfectly where the notch in the back of the kick panel is. I used 10-32 threaded inserts for easy installation with standard machine screws. I also pulled the exhaust out and drilled the hole for the O2 sensor bung with a step drill. I wanted to get that welded in while I had the welder out. The O2 sensor you see on the passenger side is for my Auto Meter Wideband gauge which I will keep installed.