My 66 Barracuda..

-
What machining was done to the block for valve clearance? That is one Sweeeeeet 273. Are you willing to divulge the cam specs?
 
WOW! That's awesome. Thanks for sharing
 
congratulations!! that is quite a build!!! you are fearless!!!

and is Sidney, somewhere is Wisconsin or Iowa !!????? LOL
 
Thanks for the kind words every one. It was one of those projects that I had built in my head 20 years ago and it's nice to see it come to life.



66fs said:
What machining was done to the block for valve clearance? That is one Sweeeeeet 273. Are you willing to divulge the cam specs?
Click to expand...

There was no mods to the block for valve clearance as far as I know, the EQ 318 heads are not huge by 360/408 specs, they do flow well though.
The cam is 257 duration @50 and 589 lift.
 
mph said:
Thanks for the kind words every one. It was one of those projects that I had built in my head 20 years ago and it's nice to see it come to life.

There was no mods to the block for valve clearance as far as I know, the EQ 318 heads are not huge by 360/408 specs, they do flow well though.
The cam is 257 duration @50 and 589 lift.
Click to expand...

Thanks, From what I have read, the EQ 318 heads do flow pretty good. I've run 1.88 intake J heads on a 273 and remember the valves being close. I guess 1.92 intakes are only .020 of an inch larger radially. That is a serious cam. Keep us updated!
 
You must log in or register to reply here.
-

Back
Top