I need measurements for and engine stand

Jaimie, I have one similar, it measures as follows:

The tubing itself is 1.5 inches by 3 inches for the upright piece and the base tubing is 2 by 2 inches square.

Upright tube from cross piece to bottom of tube is 28 inches, then has the tube welded to the top for the swivel so you can rotate the engine. I didn't measure that, but you should be able to come up with that.

Rear cross tube 30 inches.

Length of legs from cross tube forward 30 inches.

Mine has 3 inch inch caster wheels (steel). Rear casters are just straight forward and back, the front ones are swivel. Don't cheap out on the casters, lol !!

Hope it helps.

Like I said it's not exactly like the one you posted, but pretty close. Mine moves very well with a complete engine on it, and is very solid when working on the engine, not much if any springiness to it.

I would post a pic, but it's sorta buried.