C cooooledart Well-Known Member Joined Jun 3, 2015 Messages 47 Reaction score 0 Location California Aug 25, 2015 #1 How do you remove this from the end of the rod? And what is the correct term for the rod? Thank you Attachments 20150825_180436.jpg 66 KB · Views: 184
ssba Well-Known Member Joined Dec 29, 2009 Messages 2,271 Reaction score 286 Location rensselaer in Aug 25, 2015 #2 Clamp the pushrod in a vice and pry the piston off with a couple prybars or screwdrivers. Leverage is key.
Clamp the pushrod in a vice and pry the piston off with a couple prybars or screwdrivers. Leverage is key.
zkx14 Duster De-ruster FABO Gold Member Joined Dec 23, 2012 Messages 34,270 Reaction score 38,739 Location South Central PA Aug 25, 2015 #3 Master cyl push rod. It 'pops' out. Best to do while all still in car. Should be able to grab in a vice and get a fork over the part that goes in MC. Tap wit hammer.
Master cyl push rod. It 'pops' out. Best to do while all still in car. Should be able to grab in a vice and get a fork over the part that goes in MC. Tap wit hammer.
zkx14 Duster De-ruster FABO Gold Member Joined Dec 23, 2012 Messages 34,270 Reaction score 38,739 Location South Central PA Aug 25, 2015 #4 A little lube in the hole might help. Silicone spray? Its just a little rubber piece in there.