Stumped - need help!

Let me apologize for yet another suspension thread but, I was hoping to get some advice before I just start throwing money (which I don't have) at a problem.

I rebuilt my front suspension, all new parts (QA1 UCAs, re-bushed stock LCAs, all new ball joints and steering components). Everything went together great!
Also worth mentioning, I have ESPO +2" leafs in the back.

I took my car to the alignment shop after the rebuild and it seemed ok. The front seemed a little low for my taste and when I looked underneath - I'm almost riding on the bump stops.

I know I put the torsion bars in correctly (loose pivot, adjuster finger pushed all the way down when re-installing the T bars, etc) - but, I'm wondering if the torsion bars are just wore out? Is that possible?

Another weird thing is that when I went to adjust the ride height, I have almost NO threads left on the adjusters, meaning they're almost maxed out.

And finally, the passenger side sits a little lower than the driver. When I tried to raise it, both sides went up, instead of just the passenger.

What are your thoughts? Where should I start?

I was hoping for a stock - or a little higher than stock, ride height).