72 Duster Street / Strip Build

Got the call Dana 60 is done $580 on the housing work and the new 35 spline Mosers

So that makes it
$100 on the Dana original purchase
$465 on axles
$115 to shorten the housing / weld the tubes to the carrier and weld on new perches and drill the drums for the 5 on 4.5 pattern
$125 on all new rear brakes from Rock Auto

$125ish on new timken bearings and seals - haven't ordered them yet...

Carrier bearings look to be reusable, but with it already being torn down, probably best to replace them all and reuse the factory shim packs and the 3.55 set.

$930, figured it would come back in around 1K once the new axles were required.

Will have a set of 5 on 5 pattern 30 spline Dana 60 axles laying around if someone needs a set to cut down or use in a 30 spline setup...