New engine running HOT

Just an FYI to all.....

When filling an engine for the first time, to eliminate hot spots, leave the thermostat and housing OFF. Fill the engine thru the thermostat opening in the intake manifold. Once it is near the top, then put the thermostat and housing on. Then fill up the rest in the radiator. THEN STILL BURP IT!!!!!!!!!!!!!!!

Operating temp for our engines is usually 165*-195*. I have always used 180* t stats(NEVER STANT) without any issues. Milodon and Mr gasket are your best choices for t stats as they open WITH the flow of water not AGAINST like Stant, Motorad, etc do. This is necessary for anyone with hi flow waterpumps because the higher flow, in turn means higher pressure, can actually close the thermostat.