TCI outlaw shifter cable routing

I agree with the 4 foot cable and going behind the starter then maybe adding an insulator just in case. wasnt sure if the four foot cable would be long enough but my shift is mounted so when in the park position its pretty close to the air vents right under the ash tray as i have a bench seat. Also I noticed on the block of my 360 there is a bolt hole probably for mounting the clip that holds the clip for the tranny lines from the factory. I think if I put a line holder there it would help keep even the 5 foot cable clear by at least two or three inches. The moral of the story here is check your cable clearance real good or fork out 50 bucks!!!