75 Dart Sport St/Strip project

Finally got around to plumbing the brake lines, line lock, proportioning valve, master cylinder, hooked into the front lines and to the rear wheel cylinders. The front master brake line looks close to the header tube in the Picture but it's got 1 1/4" from the line and the bottom of master to the header tube. I will bleed them after I finish the header wrap and mounting them back on the heads. I may have remove the master cylinder lines to get the header out and back in.

I made brackets and mounted the radiator to the the new radiator support.

I moved the drive shaft loop forward to within 6" of front u joint per NHRA spec's.