Spun Bearing
Lost in Space
I will. This is the only mention I've seen of any actual customers outside of here. If any of these people are forum members I don't remember seeing them. How do you know about them?
Best ifs kit? rms, hdk, gt suspension, or magnum force?
- Thread starter 440 dart.
- Start date
-
Spun Bearing
Lost in Space
Pay attention! I'm not asking about RMS or HDK. Their stuff is already proven. I'm looking for validation not yet seen on the GST. If it's out there, great but I haven't been able to find anything.
Just sayin your wrong denny, fb him and ask him what it is, it's a gts, I personally talked to him, and seen the pictures he posted, and also sent me photos. And yes he's from ohio
Spun Bearing
Lost in Space
Originally Posted by 440 dart.
"...spoke with a few guys on fb who are running his system, look them up. Dan yohe, from iowa, Dan koscis, from Pittsburg who was so impressed he's ordering a third, Eric lyndes from Ohio, those guys all absolutely love it and said they've been around all the aftermarket kits"
_______________________________________________________________________
At your suggestion I did look them up. Here's what I found:
Dan Yohe - from Burlington, IA (same as GST?). Not a thing on his FB page.
Eric Lyndes - Appears to be an RMS pictured but either way, not a peep on FB about GST.
Dan Koscis - Nice black Duster pictured but again, not a word about K-frames of any kind.
I can only assume that this info may have come straight from GST. Not that there's anything wrong with that but how were we supposed to find it?
"...spoke with a few guys on fb who are running his system, look them up. Dan yohe, from iowa, Dan koscis, from Pittsburg who was so impressed he's ordering a third, Eric lyndes from Ohio, those guys all absolutely love it and said they've been around all the aftermarket kits"
_______________________________________________________________________
At your suggestion I did look them up. Here's what I found:
Dan Yohe - from Burlington, IA (same as GST?). Not a thing on his FB page.
Eric Lyndes - Appears to be an RMS pictured but either way, not a peep on FB about GST.
Dan Koscis - Nice black Duster pictured but again, not a word about K-frames of any kind.
I can only assume that this info may have come straight from GST. Not that there's anything wrong with that but how were we supposed to find it?
Spun Bearing
Lost in Space
By the shadow on the floor it does look like a GST. If so, track width looks good.
Better than any proof you could get from anybody on here.
Better than any proof you could get from anybody on here.
Sir, with all do respect Denny, you are dead wrong. I know for a 100% fact Eric's kit is a GTS, I have spoken with him numerous times and matter of fact, he helped convince me to get the GTS kit. See my screenshots below, right off of the public GT Suspension's website.
Apparently you are the one who needs to "Pay attention". that or learn how to do a search. 15 seconds for each yielded the below. I've spoken to both Eric Lyndes and Dan Koscis and both are running GTS kits.
"Pay attention" yourself there killer, this whole thread is about comparing these kits. If no data exist for any of them, how can we compare? Just because there's more people running a RMS or a HDK, doesn't give us the numbers. You sir, on both this thread and mine, have been big on numbers for the GTS kit...so lets see the numbers for the other 2 kits as well.........kind of hypocritical to say the numbers don't exist for a GTS and NOT post the numbers for the other 2.
I'm not sure why those 2 links aren't working, however you can find the screen shots by clicking on the 2nd one and then viewing my public album
Duke....I see that now and noted my mistake , with apologies ASAP (see above)....when I looked on my laptop vs my tablet, I could make out the tubing.
good luck
keep us posted
Denny
good luck
keep us posted
Denny
And Denny, don't get me wrong, I'm not trying to take anything away from you or your product. I'll admit, I'm biased for my GTS kit. However, competition breeds 2 things, better products/prices for customers and more advances/new products. Which is a very good thing with Mopars being so expensive to find parts and upgrade for. :burnout:
Spun Bearing
Lost in Space
Now I see it. You might have mentioned that you were searching under GT Suspension while I was searching under the three builders names (as I was told to), under Carl Gerst and under GTS so I did not see what you are posting. I am not a Facebook member so I am somewhat unfamiliar. Thank you.
Dukeboy
I'm good with that, if fact, I have argued that point myself.
can't wait to see them in....my experiences still has me scratching my head on some of the claims.....but time will tell and I am never to old to learn.
I'm good with that, if fact, I have argued that point myself.
can't wait to see them in....my experiences still has me scratching my head on some of the claims.....but time will tell and I am never to old to learn.
OK OK everyone, this is getting very heated/turning into a big pissing match it seems. I like all the kits out there (except magnum force and control freak), the thing is, yes, there's not a ton out there on gts yet, Carl flat out said that he doesn't have a website (working on it) and he doesn't push his product, if it's really as good as what the few customers I've talked to claim, it won't be long and word will be out, I've dealt with suspensions for many years, and if it weren't for my bad back, and poor vision, I'd be building my own, and after talking to Carl about his product, he answered every question I had, and I knew the answer before I asked, so he is very very knowledgeable, so yes in some ways I'm taking a chance on a new product, but I like to see the guys that pour everything they have into something they believe in, I went through that starting my own business over 30 years ago, I have great respect for everyone on here and I apologize for getting heated earlier, but I'm sure in no time, you'll be hearing a lot more about these setups, I'll be posting pics when I get mine installed.
Spun Bearing
Lost in Space
No sweat.
Although I was able to look at a GTS Facebook page I still can't figure out how to get those 3 pages shown in the screenshots above. Can somebody copy and paste a URL for any of them? I would really like to see them.
Never mind. it's a closed group you have to join to see anything.
Although I was able to look at a GTS Facebook page I still can't figure out how to get those 3 pages shown in the screenshots above. Can somebody copy and paste a URL for any of them? I would really like to see them.
Never mind. it's a closed group you have to join to see anything.
76orangewagon
Well-Known Member
It happens every time..lots of expert's with no actual experience. And I agree about being sick of this Forum, it's really been going down hill over the last few years, there are still some good info here and there, but there's more B.S here than any other forum I've seen.
Agreed. However, I'm excited to see your duster done so don't leave before then haha
abodyjoe
Well-Known Member
if you guys are so sick of this forum then just go away. not sure anyone will miss ya. 
abodyjoe
Well-Known Member
lol.. i forget where i even found that pic.
replicaracer43
Grumpy Old Man
- Joined
- Oct 10, 2008
- Messages
- 6,051
- Reaction score
- 7,867
if you guys are so sick of this forum then just go away. not sure anyone will miss ya.
BEST post of the day!
HemiMark
Well-Known Member
if you guys are so sick of this forum then just go away. not sure anyone will miss ya.
You and me both. Guy with 57 post is already sick of this forum. :wack:
dont let the ddor hit you in the *** on the way out.
Eh I get what youre saying but I have to admit, the derogatory remarks on alot of posts these days have gotten quite numerous. Long time members have seen it and reduced their presence, ones like Ross who will be missed if he decides to leave. I think we all need to stop undercutting each other and support/help. Doesn't mean everyone has to suck up and agree all the time, but the insults, especially on the build threads, need to stop. I can't tell you how many times I've seen people get their panties in a wad over something not being 100% factory correct.....
abodyjoe
Well-Known Member
Oh brother. People need to stop being so overly sensitive. Get over it. Ya can't handle it go somewhere else.
-
