EWIS anyone ?

toolmanmike said

Well done! My bulkhead and connectors were in good shape but I cleaned every socket and spade. It should be done. tmm

These work great! http://www.summitracing.com/parts/i...rGa9gI3MrbFdHkWZ7sulZhdgz2S8gE1a6EaAj_d8P8HAQ

Click to expand...

Cool, i didnt know these existed.

Also for the connectors that replacement pins cannot be found like the connectors that fit the instrument panel in the round connector, and in the connector that feeds the steering column, careful unpinning and cleaning are needed, and using a small needle nose plyers they can be tightened up.

Liquid Tarnex or CLR works wonders cleaning up the copper and brass on these making them like new in looks and.conductivity. rinse really good in warm water, dry , and repin.

I use a small flat blade jewelers screwdriver i ground flat to unpin the connectors. It works like a charm. Additionally i plan on using dielectric grease on all the bulkhead connectors to keep all the moisture out.