5.7 hemi swap wiring question

From Boden,
I am using the wiring, engine, trans, computer, and modified pedal from an 05 Ram 2500. I just kept tracing wires and removing or creating a circuit for each wire one at a time as I went through the harness. I spent many hours off and on over a few months working out my wiring, but I was able to successfully get it running with relatively few trouble codes. I just kept looking up the wires from each connector that led to the main fuse box.

Since you are planning to go without the trans your setup will obviously be simpler. Attached is a summary of the circuits I created. The letters and numbers correspond with what is in the factory 05 truck service manual.

Hopefully you find this helpful.

http://www.forabodiesonly.com/mopar/attachment.php?attachmentid=184441&stc=1&d=1287721060