Speedhut Gauges

will do following:
cutting the inverter harness output side ( new inverter ). making 2 connection points and route from there cables to each instrument with very sensitive fuses inside. Same for the feeder cable to the inverter. Because I suspect one of the instruments having a short/loose connector inside to the electroluminezens (EL) foils or badly cutted during fabrication. which fuses burns that instrument has a problem. Speedhut already told me to replace this instrument

Great support so far. Thumbs up! If I would be an american i would ship them to speedhut for inspection or replacement. But from here it is too expensive and would take forever... :(