Building a stroker, advice please

I think you'll be able to get your horsepower goal.

Though we did use the Edelbrock Victor intake on the BPE 424/360 we built. This engine used our ported RaceMaster/ProComp cylinder heads that flowed 290cfm @ .600". Used a 950 cfm 4150 4-bbl, solid roller cam that had .638/.645 lift, 10.7:1 compression. 456 lb-ft of torque @ 3,200 rpm, 503 lb-ft of torque @ 4,200 rpm and 562 lb-ft @ 4,900 rpm. 549 hp @ 5,300 rpm and 601 hp @ 6,300 rpm. Drives around the street very nice with 3.23 gears, 727 transmission and a 3,200 stall converter.


Traction is a little scarce.

EDIT:

Okay, I blew it and confused things. I was thinking of the two Victor manifolds, Victor 340/360 and Super Victor and referred to the Super Victor as the Victor. We ran the Super Victor and not the Victor 340/360