65-66 Folmula S barracuda LCA w/Sway tab?????

Jim Lusk said
You could probably cut them off and reweld them on in the proper position. They may not be exactly like the early tabs, but that won't make much difference. If you are also installing disc brakes there may be clearance issues between the forward lower ball joint bolt (it can be reversed with the head on the back side) and the spindles and calipers can be swapped side to side so that the caliper in the back.

Ok, thanks!! I was thinking i saw someone mentioned you could buy the tabs from manchini????

mvh said
I think you need the correct early LCAs, without tabs. The tab is just a bar of metal with a hole in it -- any shop could fab it up, or you could cut them off these LCAs. You just need to confirm the location by installing the LCA in the car with the sway bar and end links. I'm surprised your sway bar kit didn't come with an LCA bracket.

I dont have the sway bar yet, there's on at the junkyard i was looking at but ive got a feeling theyre going to try to gouge me on it so i might as well just get the Hellwig 55914 and be done with it.

Jake