Zac_F71's 71 Demon

Small update -

Got the 8 3/4 installed with no welding! Wanted to use the 1" lowering blocks I got, and after disassembling everything my friend and I found out the leads were 43.5" center to center - 1/2" off the B body axle - so we drilled the original perches to 9/16", and auged 1/4" out of the bottom of the blocks and it lines right up!

Found a leaking wheel cylinder so I replaced both, cut off the old wheel bearings/adjusters, and installed Green bearings, installed the center section, and driveshaft

Monday (tomorrow) I'm going to buy gear lube/Ford friction modifier, couple feet of fuel line, 1 gallon of coolant (from work), and 10 gallons of fresh 91 non oxy fuel.

Here is what's left - cut/patch spare tire well, hang/plumb fuel tank, fill/top off off fluids, rebleed brakes, prime/fire motor, and finish the interior

I'll upload the few pics I took in an hour or so!