Can this be straightened and used???....

Had this 4 speed trans sold but it was still on the motor! Took off the trans bolts but the trans wouldnt slip out, so I had to do the bellhousing too! Still wouldn't come apart but I could see down into the clutch assembly! 2 of the pressure plate bolts were gone and the other 2 were backed about 1/2 way! Got the bolts out and removed the entire assembly!! I have to wonder what kind of last ride this thing took....no clutch binding at all, the input shaft is blue, melted and bent, the pilot bushing is fused to the snout and the splines are completely stripped from the front segment, and the input shaft is bent, and broken inside the trans!!!


Can it be straightened and reused???