Shakedown runs

-

1972_Demon

Demonic Member
Joined
Mar 25, 2014
Messages
166
Reaction score
43
Location
Easton, PA (Edison, NJ)
I got to the track last night after changing from a carb to multi-port fuel injection.

Also did the spring relocation, caltracs, and 325-50-15 M&H drag radials.

It's a 360 with unported J-heads.
Low timing of about 32 degrees (I'll add more later)
Edelbrock Super Victor EFI Intake manifold
Edelbrock 1000 cfm Throttle Body
39# injectors
eMS-Pro running the fuel injection (megasquirt 1 extra)
904 trans with 3500 RPM converter.
Unknown compression
Unknown cam
4.10 gear
3450 lbs with me in it on the scale

Here is the best run from the night (left lane)


Any opinions?

 
It looks like it is running pretty darn good for no more than is in the motor!
 
Got any pics of car? Nice run.

Here is one from this past weekend. It was running in the 7.70s @ 87 mph on the 1/8 mile track.

https://radphotography.smugmug.com/Nostalgia-Racing/The-Digs-at-E-Town-October-25/i-3BwLJJD/A

This is a video from my dash cam same day. It was much better quality before I uploaded it.

[ame="http://vid197.photobucket.com/albums/aa127/98_snake_bite/demon_1-8mile_zpspy9ymn53.mp4"]http://vid197.photobucket.com/albums/aa127/98_snake_bite/demon_1-8mile_zpspy9ymn53.mp4[/ame]
 
Got it to run a little better yesterday.

[ame="http://vid197.photobucket.com/albums/aa127/98_snake_bite/demon_etown_zps2xqs9yuh.mp4"]http://vid197.photobucket.com/albums/aa127/98_snake_bite/demon_etown_zps2xqs9yuh.mp4[/ame]
 
-
Back
Top