2 Barrel talk

i put a 318 2 bbl on a slant before chrysler did. needs NO spical adjustments. take the stock 1 bbl manifold. grind the raised pad flush. make a 2 bbi plate 1/4 thick. with holes in the coners that are countersunk for a countersunk screw that threads into the stock manifold. and threads in the plate for the carb bolts. but the shaft MUST run parallel to the crank. with the edge of the carb plates that goes down facing the engine. unlike chrysler did. do NOT weld it. when making the linkage be sure the carb does NOT stick open. this will over rev the engine and wipe out the piston ring lands. NEVER NEVER over rev a stock chrysler engine.