I know the Mopar purest are probably going to be upset. I'm on a super tight Soldier pay budget so bear with me. I was giving a free Cervinis exhaust system off a 2013 mustang. All stainless side exhaust with X-pipe I know the tips may look ridiculous on a 67 fastback barracuda. However, when giving a free exhaust why not mock it up and see how she looks and sounds. Worse case I take the side exhaust off and put some turn downs on it. I also have a pair of treblig's exhaust manifolds; magnum on passenger, and 340 drivers side. My motor is a 71 360, 973's-318 heads, XE256 Cam, LD4B intake, still need a carb, stock ignition. I'm guessing Ill be around 240-250Hp. I figure Id show a couple pics and see what you guys think. Ill be putting the motor/trans then exhaust in during Christmas break. I will cut the cat's and resonators off the down pipe then mock and weld up something to make it work.
