carbed out

a quick update, I put the 670 avenger in a box after I disassembled for repair ,grabbed the edelbrock 1400 put 95 jets in primary and 98 secondary put 37 meter rods in with yellow springs and new accelerator pump set linkage to center hole , went from 20 advanced to 12 advance and pulled vacuum off distributer running better than it ever has, punch it from a stop and car goes no stumble, a slight stumble when cruising and hitting secondaries, but only slight , set mix screws to max idle and vacuum, then backed off 1/4 turn, my vacuum is 13.5 at 700 idle but in gear (auto)is 7 at 500 so I may change step up springs to 5 , some great advice has helped me get it running better , took her to Riegelsville pa show on sunday car ran great thanks for all the advice FABO, will have to post a burn out vid, the little 273 sounds good winding up