Dougs 67 Notch build

I had some time yesterday so I connected all the remaining brake lines to the disc/drum MC. I carefully saved all the original lines and verified them. The proportioning valve was part of the used parts I bought with my conversion for SBP discs. Happily the proportioning valve bolted in the same spot the original splitter block was. Just had to put a new double flare on the line to the rear brakes and make new lines from the Prop-valve to the MC.
DR-------


View attachment MC1.jpg

View attachment MC2.jpg

View attachment PSBL1.jpg

View attachment Propvalve.jpg