Clutch replacement/Rear main seal

inertia said
On the drivers side of the bellhousing there's an adjuster as in the pic.. You'll need to adjust those two nuts,, so there some "slack" in the linkage.. Adjustment is so as to have approx 1 inch of clutch pedal free-play before feeling clutch pressure,,

http://www.forabodiesonly.com/mopar/showpost.php?p=1970092080&postcount=7

thnx to Rocky JS for pic

My linkage looks alittle different,it's alittle rusty but threaded all the way down the rod. Which way do I need to adjust it? Do I bring the nut towards the front of the car or the rear?