1972 Dart Swinger slant six to 340 upgrade

Finally finished the relocation of the rear leaf springs. Very lengthy and tedious process but now I have much more wheel clearance and the frame is much stronger. I Added about two feet of 4''x2'' 1/8" thick angle iron to the frame in the very back on both the driver and passenger side. You can see where someone hooked onto the frame years ago apparently trying to tow something and it did not work out in their favor but the angle iron welded to the frame will fix that. Fabricated a cross beam to mount the shackles on and to add strength in the rear end. I also bolted this cross beam to the trunk for more support. Finished the front mounts and now I am ready to fabricate the frame for the fuel cell.

Homestretch baby..