Leanburn to HEI conversion question

moparmat2000 said

I did not know this. In all my years of messing with mopar electronic pickups on vac advance dizzys everything i have ever seen was black and orange, however a simple ohm check on tge mopar pickup will find the ground, and terminal G on the hei 4 pin is the ground on that end.

Click to expand...

There is no ground in a Mopar pickup. In fact either wire should read infinity to ground. I always go by the bare vs insulated terminal rather than wire color

To check voltage, turn the key to "run" with engine off. The hot side of the coil and the HEI module should both be same as battery