Coming back with a build! Need advice!

No I was planning the 440 crank/eagle H beams/Diamond pistons but we'll see if I can afford the stroker setup as I have to have the heads completely gone through with new valves/springs they will likely be ported as well so the heads are going to set me back probably more than the short block..

I found a already machined forged 383 crank not far from my machinist if I'm honest for $150.. SO as of now the plan is stock crank, stock rods, and KB162's - with a 0 deck it should yield 10.3:1 static.. plus I plan on having my machinist degree the cam as I know not how to do that..