1972 Dart Swinger slant six to 340 upgrade

Finished the front mounts. I cut out and welded on some sheet metal for appearance reasons. It will help structurally as well but we have plenty of strength as of now. The C channel used for the front mount is wider than the frame I have available to work with so It hangs down about 1/2 inch lower than the frame. I just cut the outside edges of the frame side of the mount to match the frame. This was anything that is sticking out does not look out of place.

Threw the leaf springs on. We have plenty of clearance with the fuel cell which makes me happy. Now I am ready to throw the 8 3/4 rear axle in.