I don't have a pic of the valve itself, but you can imagine a valve with a hose on it I'm sure.:D
Had some PEX pipe fittings and stuff left over from re plumbing the house so I used it to attach the elbow to the air cleaner base.
I plumbed into the air cleaner bottom side (inside the filter area) and ran a section of 5/8 hose from there to the cap on the valve cover so it gets filtered air sucked in through that and it crosses over through the engine to the PCV valve on the other cover.
The PCV valve is T'd into the power brake booster vacuum at the back of the carb base and the valve covers both have baffles.
The little twisted wire is so there is no chance of anything going down the intake just in case anything ever comes loose.
