SRT8CUDA Build

I now have a lot of respect for the assembly line workers in 1969. It probably took them less that 60 sec to install the QP glass and regulator and guides etc and took me a week to put one in!!!
After cleaning all the parts and test fitting, I then found I could not follow the Service manual installation instructions, because of some simple clips.
I got repro clips that hold the rollers in place and you are supposed to simply reach around behind the roller and snap them on - after fitting all the linkages together. Only problem is the repro clips are very strong and the only way to get them on is on the bench.
Then you have to figure out how to insert the rollers in the correct slots with the glass and regulator and guides in the door. It can be done, but was a puzzle for a while!!
I put all the adjustments back as the factory had them, but they were away off from what they should be.
Only took me a day to install the other QP glass!!

View attachment IMG_3357_1280x719.jpg

View attachment IMG_3358_1280x719.jpg

View attachment IMG_3369_1280x719.jpg