Hi everyone

-
M

moparDan

Member
Joined
Dec 27, 2015
Messages
8
Reaction score
0
Location
Florida and Maryland
I'm new to mopar, have allways had GM or Ford cars. I have a 69 barracuda with lots of rust in the lower panels so will probably be asking questions later about quarter panel "skins" and which manufacturer has the best panels.
 
Welcome to the site, i would say that AMD has the best panels out there.
 
Sorry everyone that responded. I'm new to forums and not familiar with how they work. It is a 69 convertible with 318 automatic that I've had for years and just covered it up. I'm now a snowbird and this is my second winter in FL so I thought I'd bring it down to FL and see what I can do with it. It's been sitting so long that the brakes don't work and it wouldn't stay running when I was trying to get it on the dolly. I used to be good with cars when I was a lot younger so I rebuilt the carter bbd and I can't get the car to idle. According to my Sorensen kit it is the Type III carb and has a vent tube on top where the accelerator pump comes out. Is that Type III carb hard to deal with? I wanted to get it running so I could work on the brakes and do a little at a time. I've plugged up the vacume hoses and still can't get it to smooth out. l've been reading other posts and I guess I should get a vacume gauge.
 
You must log in or register to reply here.
-

Back
Top