AMD worth the price difference

-
Driver side floor for my car was same gauge, maybe a hair thicker, and a perfect match.
 
dukeboy_318 said:
Is AMD worth the 5X price tag for some sheet metal. I'm looking at a rocker panel and AMD list price is 299.99 while Sherman's is 41.67
Click to expand...

I used a NOS quarter and an AMD one on a 69 Charger. My body man said the AMD quarter fit better than the NOS one.

I recently put 2 quarters and trunk extensions on a 71 Demon, the body man there said they went on great. No issues. I can get you a deal on the AMD parts, if you're interested, just email me.
 
Go with AMD and you won't be sorry . Spendy yes but they use Mopar OEM specs. Bought a right finder from them a while back fitment was right on very good quality.
 
My kid wadded up the bed side of her truck and we used a Sherman's bed side, I was very unhappy with the quality. AMD is the oldest way to go
 
Spend more now save a headache. Get the AMD stuff. I have learned that the inexpensive stuff winds up in the trash or reworked extensively. Even if it's a driver fix it once and you'll be happier for it
 
I posted a thread about this earlier. The bummer with AMD floors is you have to buy the front AND the back. The do not sell the foot wells individually.:wack: I am still trying to decide what to do as it's just a floor pan and I only need the front on one side.....:banghead:
 
Do yourself a favor AMD fits. Only problem I have so far is shipping dings.lines look good and very little tweaking. If your cat don't need to be kicked,or your kids screamed at,put out the extra cash. In my experience it is cheaper in the long run.
 
hosehead said:
I posted a thread about this earlier. The bummer with AMD floors is you have to buy the front AND the back. The do not sell the foot wells individually.:wack: I am still trying to decide what to do as it's just a floor pan and I only need the front on one side.....:banghead:
Click to expand...

Buy it from these guys, I only needed the drivers side it fit my duster very good.

http://www.c2cfabrication.com/
 
A little off topic but since several of you mentioned having your body guy do it, what kind of price will I be looking at to have a quarter panel replaced.
 
I've been buying AMD parts at Summit Racing, Summit Racing sells AMD metal its less cost and shipping is cheaper!
 
If I pick up my parts from the local Tamraz warehouse in Plainfield, IL they don't charge shipping.. Worth the 40 min drive....
 
You must log in or register to reply here.
-

Back
Top