Question full voltage?

the last 4 terminal (dual) ballast I checked had 1.6 ohms on the "coil" side (nominal is .5 ohms) and 6 ohms on the functioning 5th pin ECU "start" side (nominal ohms is 5 ohms) and I added a blue loop on the other end (so there is blue loops on both ends) to convert it to a parallel circuit & got 1.1 ohms which'll work fine with an orange box and an OE coil (& likely work well with your aftermarket coil also). the nominal ohms for the MP ballast for orange/chrome boxes is 1.25 ohms. You do have a fair amt of leeway on what you can get by with. (always carry spares tho!) but this was very close to OE dimentions & worked flawless. To the guys' credit there has been some VERY GOOD INFORMATIVE posted here in this thread!