Torque peak of 630 ft-lbs is at 5100 rpm, HP peak of 675 hp is at 6100 rpm. This is with the Dominator carb and the smaller cam. I tried a larger cam that peaked a few hundred RPM higher, but the lower speed torque was off a lot. Seems like the smaller cam works better in this combo but I'm still working on it. I'm trying to figure out what to do next with the cam.
I also need to play around with some different carb spacers, try some different spark plugs and play with the ignition timing. So far I've just been running it at 35 degrees of advance so there might be some more power hiding in the ignition. Dyno time is expensive so I can't always test everything I want to.
