headers for a 318

As nice as TTI and Doug's headers are... I'd just keep it simple and cheap. Here's what I've got: http://www.summitracing.com/parts/hok-5901hkr/overview/make/dodge They're relatively cheap, fit well enough (didn't have to alter them in any way, I have power steering, and also a manual transmission), there's still room for a nice big Wix oil filter as well and you don't need an oil filter adapter. Clears my mini starter no problem and changing the oil filter is still pretty easy. Plus, if you hit a pothole, who cares if they get a little bashed up? Cheap is good, especially if you're not trying to squeeze every last HP out of your combo.

I've used these headers on a 318 and also a 340 in my '73 Dart Sport. The worst thing about them is removing the center link for installation but that's nothing that can't be taken care of with a big hammer and a bigger hammer. You could change out the tie rod ends and idler arm and stuff while you've got the center link off (if your car needs it..). :glasses7: Then get dual exhaust and call it a day.