67 cuda stocker...new partsmonsta grilles installed!!!

I'm one of the owners who did their own trim parts renew. First time was long before internet. When I removed the 2 small pieces of trim from the 67 trunk lid I found common 'T bolt' trim fasteners were used. Those weren't going to work in the wide center piece so a very similar design of fastener was special made for that one.
Moving on to the front grilles I had expected to find about the same type of trim fasteners. It wasn't until I disassembled and reassembled these grilles that I realized why a welded stud was used. Too much time required in placing separate fasteners for factory workers. I wasn't assembling 100s of grilles day after day like factory workers. I had the one set to conquer. So I removed all of their welded studs and installed the very same, common, off the shelf, 'T bolt' fasteners that were used in the narrow trunk lid pieces. Worked perfectly. Cadmium plated too.
I also learned the hard way that stretching and turning a 1/4 wide stripe tape wasn't going to stay long term. I had to buy a wide 3M material and custom cut the turn portions. That worked great too.