FiTech EFI system

I bought mine through summit racing. I have an after market 1/2" sending unit in a new reproduction tank. I'm also using the frame mount fuel system. I put a fitting with an oring in the side of the tank for my return. No issues with the o2 sensor cable. It was plenty long enough. I did use 90 degree AN fittings on the return and fuel inlet so my drop base air cleaner would clear. I'm using a 1/2" spacer between the throttle body and air cleaner. I've done the initial start up but haven't driven it yet. I need to loom a few wires prior to driving it. It started a little rich but quickly corrected itself. So far so good. Will update later in the week.