looking for cam and pistion ideas.

Cope, I ran your engine with a little more head with the 284/528 MPP cam and 10.5:1 KB hyper pistons. It made 467@5600 and 514@3900. That car went 11.56 in the 1/4.

You have way too much gear for that engine no matter what cam you put in it and you may find that the convertor is too low of a stall.

I have 4.56 gears in my latest car and trap at 6200 but the engine which is more stout the former car peaks hp at 5700 and peaks torque at 3500. That's with a 28" tire.

I'd think 4.10's or 4.30's and a 28+ tire. 3500-4,000 stall is likely where you'll end up but you won't know until you dyno the engine. If you are going to guess go 4,000 on the stall.