What Brand Carburetor?????

swinger 74 said
Im gonna run a Weiand stealth intake.

That means it must be a 'square bore' pattern carb.
Hood clearance will be tight with any high rise dual plane. Something to keep an eye on. Drop base cleaners are a work around but can cause weird flows past the vents and/or restrict the air if you're not careful.

The car is gonna be a daily driver. ...Im gonna bu the comp cam XE 262. Well with the ponies i wanna just have them so when i see some POS honda/tokyo toy trying to show off i wanna show off my American muscle lol.

HP goes up with rpm. On the street you'll want to focus on Torque.
That cam will be good for torque. So do the math or look at Holley's website for sizing the double pumper or vac secondary carb of your choice. Off the top of my head, a 600 or 650 will be perfect for a guy that wants bolt on performance. If you really want potential for more cfm, then a VS up to 750. QF makes a 725 IIRC and there's the ole Holley 3310.

As for the carbs i know nothing about edelbrocks. Never bought or used one. ive always liked and used holleys. they look better than edelbrocks. But looks dont mean nothing. I can pick up some used edelbrocks cheap right now. i also found a nice used holley 750dp for $100. I bought a new holley 650 for it but read that with the cam im gonna use i need a 750 so that holley will most likely go on my truck

If do Ed'ks are based on the Carters. They had a rep for better than average good out of the box performance than new Holleys. However they have more adjustability, so you'll need to learn more about carbs to tune them. But they do let you tune for more variety of conditions without breaking out the wires, drills and tapps. Avoid the 750 as the several reputable sources report the booster is too high. It can be extended, but that doesn't match what you're asking for.