My stroker build thread
With the camshaft testing Andy has been doing I'm wondering what cam you are going to go with?
this the cam that i intend to run. Actually pretty mild but I was recommended this cam by a very reputable engine builder.
Brand: Lunati
Manufacturer's Part Number: 40230734
Part Type: Camshafts
Product Line: Lunati Voodoo Camshafts
Summit Racing Part Number: LUN-40230734
UPC: 090127703366
Cam Style: Mechanical roller tappet
Basic Operating RPM Range: 3,200-7,200
Intake Duration at 050 inch Lift: 255
Exhaust Duration at 050 inch Lift: 263
Duration at 050 inch Lift: 255 int./263 exh.
Advertised Intake Duration: 285
Advertised Exhaust Duration: 293
Advertised Duration: 285 int./293 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.600 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.600 in.
Valve Lift with Factory Rocker Arm Ratio: 0.600 int./0.600 exh.
Lobe Separation (degrees): 110
Camshaft Gear Attachment: 3-bolt
Intake Valve Lash: 0.016 in.
Exhaust Valve Lash: 0.016 in.
Computer-Controlled Compatible: No
Valve Springs Required: Yes
Quantity: Sold individually.
In-Store Pickup: Choose In-store pick-up (OH, GA, NV) on our web site.
Unless you're a witch doctor, choosing the correct cam can be a nightmare. These Voodoo cams from Lunati are the answer! The gurus at Lunati have taken cam design to another dimension with profiles never before utilized in cams. Only the world's best profiles are included in this line, making cam selection an easy choice. Voodoo incorporates 30 years of cam design experience with more recent developments in profiles, geometry, and tolerances to deliver some of the most aggressive ramp profiles ever used in cams. Asymmetrical lobe designs with slower closing sides set the valve down easy to reduce noise and premature failure of the valvetrain. These cams deliver more "area under the curve," meaning more throttle response, quicker acceleration, more vacuum, and better efficiency, combined with maximum horsepower and torque.