Stalls with electrical loads

AJ/FormS said
So, no, this in not right.
You set the timing to 14*, and then hooked the V-can up, But did not re check the idle timing after that. Then you set the idle speed to 650 to 700, and adjusted the mixture screws. It now idles at 19" in Park/Neutral. It has a 2400 TC in it.

Is this correct?

I don't have timing tape on the balancer but I did check timing with light after hooking up vacuum. Can is working. Don't know how much advance but it moves it 15-20. Yes everything else is correct.