Which lug nuts for Centerline Autodrag

I always get a nut that has a shank that comes out 1/8" short of going completely through the wheel lug hole. You install the washer and put the lug nut in the wheel (with the wheel off the car) and check to see how far the shank goes through the wheel. You always want to catch as many threads as possible. You can measure with a skinny measuring tape but I never install new lug nuts without putting a proper washer on the lug nut and installing in the wheel while it's off the car. There's nothing more dangerous than having a lug nut shank bottom out against the disc/drum surface, you'll never get the wheel tight against the hub that way!! And there's also nothing worse than not catching enough threads only to strip one out!!

treblig