Coach Controls Wiring Harness?

I don't have any experience with Coach Controls, but I recently purchased a Ron Frances ground kit and some battery relocation cables. They seem like quality kits so far.

Battery cables came with nice (lead?) Terminals on the battery side and 4 crimp/solder terminals for the other sides. Even has a little vise crimp tool ( shaped peice of metal ) to crimp the terminal on before you solder it. Battery cables have colored heat shrink with the glue. Instructions even give tips like dipping the wire end in flux before crimping to make soldering easier.

The only issue I have is that the terminals on the grounding kit aren't soldered or heat shrinked. They have simple crimp connectors with a fiber insulating sleeve over the end. It's really a non-issue for my application though, I'm going to cut them off and change up the grounds a little anyway.

As for the actual harness, I'm using an EZ-Wire kit. I've done 2 in the past and they are quality kits.

If you get the Coach Controls kit post some pics and do a install thread.