slant 6 swap

Thanks every one I'm glad to find a place to get a bushing, there is no one around here that could make one right. Why it wont start is a very good question although the compression is not great, I'm sure from setting so long it should be enough to start. It's getting spark and cranking OK. the only thing I can think of is timing, I had to pull the dis. to replace the points and it is all most impossible to see where it lines up with number 1 because of where it sits. I had to cut the center out of a dis. cap to see where the roter really was. by the way it is a 225 I've tried gas and starting fluid just to try and get a pop out of it and so far it's stone cold dead even rotating the dis. makes no difference, so maybe I'll pull the dis. and try moving it and see what happens. The compression and the timing mark seem to be dead on so I don't think it's jumped the gear so I'm lost.
Lary