View attachment pic's2 154.jpgHere are a few pic's of the work on the control arms , The reason I used mustang stuff is I am cheap and still do things the old way , use what there is on hand ! Lower control arms braced and boxed with holes for access to the struct rod arm bolts and lower shock mounts . Also strut rod mount points . used 3/16 angle for strut rod mount , drilled holes and used cap screws to attach to frame , heated and bent strut rod outward until it was in the correct location to weld in tab for end with urthane bushing . when finished welded it and bolted it to frame . Heavy DUTY .