rear disc brakes on 8 3/4

Buschi340 said

now that you are here :)
what exactly discs, callipers and pads are used? Can I source them in europe when the time has come to replace them?

dodgedifferent2,

i like that your set is using the Ford Mustang discs. They are even here super cheap. Calipers i didn't found here yet.

One mayor question i have. Is one or both sets moving the rim outwards to the Fenders? I don't have room there. the only way is to Change the back space of the rims.

Click to expand...

Calipers, rotors and pads from a 94 - 2004 mustang (base model) can be sourced from any parts store. If wanted you can get the junk caliper from a junked mustang and get the core charge back.
If the parts store carries mustang brake parts in Europe then they should have them
Only issue is the rotors center register needs to be enlarged .04 of an inch to mount on the center register of the axle flange

The rims would be moved out the thickness of the rotor which is 1/4 inch. But if I remember correctly the drum is at least 1/8 inch thick. (Never measured)
So could possibly move the rim outwards an 1/8 inch
If someone has a drum readily available they could measure the thickness at the center hole to confirm