2-Barrel to 4-Barrel Conversion

I got a few parts in from Mancini for the above swap. Here's the list.

HFAX42 68-70 return spring bracket
HF0060 Small block 4 barrel throttle cable bracket
HF407 340-6 coil mounting bracket
1843 Edelbrock throttle lever adapter
for you automatic transmission fans, here's a handy adapter to extend the kick down linkage as needed.
Edelbrock 8004. (Last photo)

The return spring bracket sets a bit crooked but will work fine with a little tweak.
The throttle cable bracket looks like it will work perfect.
The throttle lever adapter fit good and should work fine
The Coil mounting bracket will need some grinding to fit simply because the intake runners on the LD4B are wider than the factory 340-6 runners.. If you spread the ears out to fit over the runners the bolt holes won't line up.






Mancini HFAX42 throttle spring bracket



Mancini HF0060 throttle cable/ kickdown lever bracket



Mancini 340-6 coil bracket


Edelbrock 8004 Kickdown lever extension.




Edelbrock 1843 Mopar throttle adapter fo most Edelbrock/Carter carbs. There are quite a few different ones. check to make sure there is one for your carb.

View attachment 20160206_144541.jpg

View attachment 20160206_144806.jpg

View attachment 20160206_144712.jpg

View attachment 20160206_144607.jpg