Old Man's 66 Cuda Funnycar build

Managed to work on the cooling system a little today . To start with the radiator is 19x31 with 2 one inch tubes , there is a aluminum fan shroud with louvers punched in it to let hot air out when the fans are not running . there are two 12 inch Spal fans to help pull air thru the system . I will have them set up to be controlled manually with two switches and a set of relays . I built two air dams on both sides of the radiator to make the air flow go thru the radiator . I bent up two brackets to hold the radiator in place at the top will do the same for the bottom . I will use window foam stripping to go between the brackets and the sheet metal around the opening to keep the radiator from rubbing a hole in it self .Next will be trying to figure out the radiator hose routing . I know that there will have to be a filler neck up next to the engine , the engine sits higher that the top of the radiator .... will always have air in the system if you do not do this ..
View attachment 001.jpg

View attachment 002.jpg

View attachment 003.jpg

View attachment 004.jpg

View attachment 005.jpg