Adapting a SBC Intake to a SBM

Yep, this is for the sprint car. I am aware it would be a disaster on the street. My idea was, as you can see how close the ports are to matching, machine the port surface so it will sit in the valley of the Mopar like it should (assuming the angle of the intake port surface is different), then grind off the bolt holes and weld on a flat plate and re-drill it for the Mopar bolt pattern or something like that. Then finish up with port matching. The only other idea I've had was to start with a tunnel ram... Or I could just try making an intake out of aluminum tubing... Hmm.. Thoughts?