my 727 build thread

I am starting to prep my new 727 trans case for the next season of street/strip duty. I have some parts on the way but have only dis assembled the trans and started dressing the case inside and out.

here are the pics of disassmebly.







once i had the trans all apart i started the cleaning process. i also deburred all the casting marks on the inside of the case.





then i moved to the outside of the case. i will be running a full manual valve body with an aftermarket cable shifter so i got rid of all the un needed mounting points.





then i started to smooth, blend and clean up the outside of the case



here is the tail shaft done and ready for paint.